2004 Trademark Mountain Industry Taiwan Model HUV-B UV Coater 40″ With Dorn Stacker Reference #250079

Taeyong Foldmaster 36″, Straight Line, Auto Bottom, Nordson 4 Glue Gun, Hotmelt 1 Gun, Glue Tab Grinder Reference #250078

Sakurai SC 112A UV Coater 2 Lamps, Dorn SPE Stacker Reference #250077

Richards Electromatic Super Die Maker Jig and Drill Reference #250076

Kluge 14 x 22 EHD 1 Foil Pull Reference #250075

Heidelberg Cylinder 22 x 30 Reference #250074

Heidelberg Cylinder 20 x 28 Reference #250073

Gerber Profile 408 Complete with Tooling Reference #250072

Die Hand Tools (8) Units Reference #250071

Datien CT-115E 45 Inch Paper Cutter Double Knife Drive Arms, Clamp Pressure Adjustment Wheel, Knife Drive Arms Overload Device, Infra-red Light Barrier, Mechanical Knife Lifting Device, Powerful Electromagnetic Brake – Clutch, Oil-less Brushing & Abrasion-proof Bearing Plate, Ball Bearing Lead Screw & Linear Bearing Slide-rail, Mitsubishi AC Servo Controlling Program, Computerized Controlled Backguage Positioning, 10.4” Color LCD Monitor Survey, Safety Latch for Knife Carrier, Table Slot Cover, Optical Cutting Line Reference #250070

D&K 40 Inch Double Sided Laminator With Slitter Reference #250069

Auto Bender HC330 – SND Reference #250068

2020 SBL 1050 SE Die Cutter with Stripping -Wide feeding range from 400x370mm -Non-stop device for feeder and delivery station allows for continuous production. -Double sheet and front lay register device for proper sheet calibration. -Push and pull (2-in-1) side guide device for quick changeovers. -Seven (7) high strength alloy gripper bars with specially designed gripper bar fingers which open simultaneously. Each gripper bar is also equipped with a registration adjustment system. -Touch screen monitor with computerized self-diagnostic system is easy to operate and helpful for troubleshooting each section. -Cutting pressure can be adjusted manually according to the stock requirements up to a maximum pressure of 300 tons. *Various stock cutting range from light paper to B-flute. -Special double action stripping device and gripper edge device for easy waste removal. -The brush and jogger device in delivery station for proper pile alignment. -Stripping section with center line system and registration system Reference #250067

2016 MB-SL Beseler Model T-18-8 Shrink Tunnel and Wrapper Reference #250066

2014 SBL 1050 SEF Precision Leveled Platen with 300 Metric Tons of Pressure, Honeycomb Base for Easy-Locking of Stamping and Embossing Dies, Improved feeder head to better handle a wider variety of stocks including light weight paper, Quick adjustment of feed wheel assembly on in-feed table, Auxiliary pile for non-stop feeding, Improved gripper bar design, Precision leveled platen w/ 300 metric tons of pressure for improved foil stamping & heavy cutting, Head-stop and side guide sensors for monitoring registration, Advanced oil lubrication for the toggle system, High-quality gripper bar chains, Automatic oiling of gripper bar chains, Automatic on/off impression system, Improved sheet delivery system with electrical slowdown brush system, Large color touch screen display for easy reading of data and troubleshooting information, High-resolution encoder for all sensor controls and status monitoring, Updated version of foil control system with full color touch screen panel, Improved foil threading system for better stability at higher speeds, (3) individually programmable foil pulls, (6) foil rewind shafts with dancer rollers, (12) heating zones with individual temperature controls via touch screen, Dual air blast for better sheet separation and smoother delivery, Uniquely designed cat-walk to save space and allow easy access, Sheet inspection table with overhead light, Machine elevated for increased pile capacity, Honeycomb base for easy-locking of stamping and embossing dies, Easy foil loading system, (2) Honeycomb Chases Reference #250065

2014 Datien DPTJ 125A140 Pile Turner Pile Clamp and Turning System, Strong Air Blower System with Air Volume Control, Pile Aligning Device, Heavy Duty Jogging System, On-Ground System with No Pit in Ground, Sheet Size (max): 800m/m x 1250m/m (31.5” X 49.21”), Pile Height (incl. pallets) (max): 1400m/m (55”), Handling Capacity (max): 1000kg (2,200 lbs.) Reference #250064

2008 Hongye Model ZH-880ABL Folder Gluer Straight Line, Auto Bottom, Nordson Glue System LA404 4-Guns, Lower Left Glue Pot Plus Upper Glue Wheels, Specifications: 9000 x 1100 mm, Proportion: 9500 x 1200 mm Reference #250063

2005 SBL 1050 SE Die Cutter with Stripping -Wide feeding range from 400x370mm -Non-stop device for feeder and delivery station allows for continuous production. -Double sheet and front lay register device for proper sheet calibration. -Push and pull (2-in-1) side guide device for quick changeovers. -Seven (7) high strength alloy gripper bars with specially designed gripper bar fingers which open simultaneously. Each gripper bar is also equipped with a registration adjustment system. -Touch screen monitor with computerized self-diagnostic system is easy to operate and helpful for troubleshooting each section. -Cutting pressure can be adjusted manually according to the stock requirements up to a maximum pressure of 300 tons. *Various stock cutting range from light paper to B-flute. -Special double action stripping device and gripper edge device for easy waste removal. -The brush and jogger device in delivery station for proper pile alignment. -Stripping section with center line system and registration system Reference #250062

2004 Taeyong TY PL 1150 Litho Mounter Reference #250061

2003 SBL 1050 SE Die Cutter with Stripping Reference #250060

2000 Brausse Super 110-C6 Straight Line, Auto Bottom, Nordson Hot Melt 3 Guns, Pafra 4 Cold Glue Guns, Glue Tab Grinder, No Working 4 Corner Reference #250059

1991 Sakurai 102 Dorn SPE Stacker Reference #250058

1991 Potdevin Model 3PI-482 SC Gluer with Presser Roller (2 Units) Reference #250057